Description
CALIFORNIA AIR TOOLS OLF-3500 6.5 Hp Ultra Quiet & Oil-Free Motor/Pump (208/220v 60hz 3-phase)
20.0 CFM @ 40 PSI
17.0 CFM @ 90 PSI
15 Amp
208/220 volts, 60hz, 3-PHASE
85 Decibel Noise Level
6.5 HP (Rated/Running)
The Powerful OLF-3500 6.5 Hp motor/pump operates at only 1700 RPM creating less noise and less wear. The Oil-Free OLF motor/pump is engineered for high performance and durability. The 3-Phase 208/220v Oil-Free pump allows for use in a variety of temperatures (cold starts; no oil in the pump).
Directly supports California Air Tools Air compressor model: CAT-60065C (60-Gallon, 6.5hp, 220v 3-Phase)
FEATURES:
· Ultra Quiet only 85 Decibels
· Oil-Free Pump
· 20.00 CFM @ 40 PSI
· 17.00 CFM @ 90 PSI
· Maximum Pressure – 145 PSI
· Maximum Output Air Pressure – 480 lmin / 90 PSI*
· 208/220 Volts / 60 Hertz / 3-Phase (200-250vac operating volt range)
· Amp draw – 15.0 Amps (no capacitor)
· Thermal Overload Protector
· Low Vibration
· Less Heat – Dissipates heat more efficiently
* 58 pounds (62 lbs in packaging)
* L (11.5″) x W (6.5″) x H (6.4″)
* Comes complete with:
(4) 2.0 Hp Air Filters
(4) 4″ Air Intake Tubes
(4) Shock Struts
* Installation Requirement: Unloader and/or Bleeder Valve Required
* 1 Year Limited Warranty
* ETL Certified
· 1-Year Limited Warranty
· Part Number 91441
*Regulated Output Pressure cannot be adjusted any higher than the default output pressure level of 90 PSI.
Direct supports California Air Tools Air compressor models: CAT-60065C.
OLF-3500 PERIODIC MAINTENANCE:
A. Service/replace piston seals every 2000 operating hours (see photo below). Replacement Piston Seal 4-Pack – Part Number 91457-4p (click here to purchase)
B. Replace air filters every 2 years or every year if compressor is exposed to a dirty or dusty environment. 4 air filters are attached to motor-pump. Part Number 90260.
NOTE: This is NOT an air compressor. This is a replacement motor-pump which can be installed into existing California Air Tools equipment or 3rd party compressor models (location holes may need to be adjusted on select models).
CAUTION: If installing onto a Non-California Air Tools air compressor or unique application you will need to have the electrical and mechanical knowledge for properly installing this motor-pump. It is important to properly configure an UNLOADER valve and CHECK VALVE with the motor pump (to correctly bleed pressure off of the pistons) otherwise damage to motor may occur.
Reviews
There are no reviews yet.