Description
CALIFORNIA AIR TOOLS 10020SMSPC 2.0 Hp SMART Ultra-Quiet & Oil-Free 10 Gallon Air Compressor in Sound Proof Cabinet
2.0 HP (Rated/Running)
110v 60hz
Sound Proof Cabinet
58 Decibel Noise Level
SMART Controller
10 Gallon Steel Tank
6.4 CFM @ 40 PSI
5.30 CFM @ 90 PSI
110 Volts / 60 Hertz
The CALIFORNIA AIR TOOLS 10020SMSPC SMART Ultra Quiet & Oil-Free 10 Gallon Air Compressor, in Sound Proof Cabinet, is designed to be one of the quietest 2.0 Hp air compressors in the industry having only 58 decibels of sound.


The MDR2i OLED Smart Controller may be connected to mobile phones, tablets, notebooks, or computers. The controller can be used as an access point or can be connected to a Wi-Fi network. Compressor features and parameters may be entered and controlled comfortably along with remote monitoring. Provides remote control of daily compressor ON/OFF scheduling and increasing or decreasing output air pressure levels on the fly for different tooling or equipment (no more mechanic pressure switch adjustments!).
The Powerful 2.0 HP (SP-9421) motor operates at only 1680 RPM creating less noise and less wear. The SP Series of Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times.*
The Oil-Free Dual Piston Pump System is engineered for high performance and durability. The CAT-10020SMSPC SMART Air Compressor has a Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 Plus hours.
The Oil-Free pump allows for use in a variety of temperatures (cold starts) and uneven terrains (no oil in the pump).
The large 10 Gallon Steel air tank and Soundproof Cabinet is 190 lbs.
The sound proof cabinet has two latching doors that allows for easy access to the air compressor and components.
The two cabinet exhaust fans are used to remove air from the cabinet to reduce heat and provide a cooler working condition for the air compressor.
The 4 caster wheels makes moving the air compressor from location to location very easy.
The Easy Start Valve feature allows for a easier start up using less starting amps. The Easy Start Valve releases a small amount of air from the pump at start up to produce a no-load condition allowing the motor to spin freely. This no-load start up requires less amps for a easier start up in cold temperatures.
Designed for the person looking for Power, Air Flow, Less Service and Maintenance with at Least 30% Less Noise!
Features:
* Ultra Quiet – Only 58 decibels
* Oil-Free Pump – Cleaner air for better tool operation.
Less maintenance and Costs.
* Tank Pressure gauge
* Regulated Output Air Pressure gauge
* Pressure Regulator Control Knob (0-120 PSI)
* One – Female Industrial “Push to Connect” air port quick connector (1/4″ NPT)
* Easy Start Valve – For Less Starting Amperage
* MDR2i OLED Smart pressure controller for remote monitoring and control
* Working Pressure 90-120 PSI (+/-5 PSI). Adjustable up to 105 PSI Kick-On; 130 PSI Kick-Off maximum.
* Thermal Overload Protector
* 110 Volt / 60 Hertz
* Low Amp Draw – 14 Amps
* Dedicated 15 amp outlet -14 gauge 25ft cord – Min. 5500 Watt Generator
* Time to fill tank from empty to full – 120 Seconds
* Recovery time from 95 PSI to 125 PSI – 25 Seconds
* Duty Cycle – 70/30*
* Less heat which dissipates more efficiently
* 10 Gal. Steel Air Tank With Sound Proof Cabinet and Swivel Caster wheels
* L (19.75″) x W (19.75″) x H (31.5)
* 145 lbs
* 1 Year Limited Warranty
* Comes complete (2) Air Filters
* Commercial Use: Refer to State & City Codes
* Non-ASME Air Tank
* Manufactured in Mexico-USA. Assembled in USA using global components.

Includes MDR2i OLED Smart Pressure Controller for remote monitoring and control
- Programmable ON/OFF Times
- Pressure ON Level
- Pressure OFF Level
- Unloader Relay Delay
- Auto Drain Time
- Drain Valve Time
- Overcurrent Limit
- Pressure Units
- Total Active (Motor-Pump) Running Hours

Product Video Reference: CAT-10020SPC base model overview (without Smart Controller)
PERIODIC MAINTENANCE REQUIREMENTS:
Replace the 98% Air Dryer Cannister/Cartridge every 4000 operating hours (~2 years on average).
Replace 2 Hp air filters (2 are attached to motor-pump) every 2 years or every year if compressor is exposed to a dirty or dusty environment. Part Number 90260
Add-On Options:
16 Piece Air Hose & Air Tool Accessory Kit (CAT-376)
California Air Tools Hybrider Flex 1/4in 50 Foot Hybrid Air Hose
317 Water (moisture) & Oil Separator Air Filter 1/4 NPT
Optional Refrigerated 98% Air Dryer, RD-91502, 110v 60hz (CLICK HERE)
California Air Tools 10020SMSPC Owners Manual_04-25
Smart Controller MDR2i Owners Manual_10132025
SUPPORT VIDEO – How To Regulate Output Pressure on Your Air Compressor
SUPPORT VIDEO – How to Connect Air Hose to Air Compressor
Auto Drain Connectivity (Instructions)
*70/30 Duty Cycle – Click Here For More Information
*California Air Tools is not responsible for improper remote control connectivity which may be attributed to unverified or unknown installation site variables, including Modem/Router equipment, WiFi signal connectivity indifferences, static vs. dynamic protocols, internet availability, signal strength or other unknown factors which could interfere with ideal remote operability and are beyond California Air Tools control and subsequent warranty coverage.

















Reviews
There are no reviews yet.